How to change from AltaiCare to Insights?

Check if AP supports Insights

    1. Check if AP supports Insights. (How to check if the AP supports Insights?)

    2. If the AP does not support. (How to update Firmware when the AP doesn't support Insights?)

    3. If the AP support, please proceed to the next step.

 
Change Remote Management to Insights

    1. Check the box of Enable Remote Management

    2. Select Insights as Management Type and Cloud as Connection Type.    This option will let AP connect to the Insights cloud server (ap.insights.altaitechnologies.com)

    3. Select one of the following options for the management type on both radios: (1) Radio0(2.4G); and (2) Radio1(5G)

    4. Click Submit button

• Not Management: Under this mode, all the radio configuration and statistics monitoring will be disabled in Insights
• Full Management: Under this mode, the radio will be fully managed by
  Insights. Any configuration changes made on the AP radio and WLAN profiles in Insights will be
  provisioned to the AP. In general, this option is selected when the device is operating in AP mode
• Monitor Mode: Under this mode, all the radio settings in Insights will
  become non-configurable. Also, any configuration changes made on the WLAN profiles in Insights will not
  be provisioned to the AP. In general, this option is selected when the device is operating in Station
  Mode, Bridge Mode and Repeater Mode for radio statistics monitoring   Click Submit button
  
  Note: Make sure the firewall and IP routing settings of the local network allow
  the AP traffic to reach Internet via local management VLAN for the AP connection with Insights cloud
  server.